Back Panel Connectors; Ethernet Ports - Imagine communications Nexio NX1011 MGX Hardware Manual

Nexio® NX1011 Series
Hardware Guide

Back Panel Connectors

Label
Power Supply Modules
Mouse
Keyboard
USB
RS-232
VGA
Gigabit Ethernet
U-LED
Fibre Channel
10 Gigabit Ethernet
(Lower-right Connectons)

Ethernet Ports

There are four or six gigabit Ethernet ports on the NX1011 depending on the type of NX1011 server you
have. Nexio servers that operate in a Storage Area Network (SAN) environment use Ethernet to keep all
nodes in sync with each other and to perform functions not carried out via the fibre channel ports
assigned to the network. The Ethernet ports are typically used for communications to the Nexio LAN or
for file transfer.
© 2014 Imagine Communications Corp.
Connector
650 watt redundant, hot swappable power supply
modules.
Connector for PS2 mouse.
Connector for PS2 keyboard.
Unassigned USB 2.0 ports.
9-pin D-sub connector for RS-232 serial port
connection. (This port can be used with a Time Code
Corrector module to synch the device to your house
network time reference.)
15-pin port for primary VGA monitor connection.
 RJ-45 10/100/1000 Mbps base band connections.
 There are 4 or 6 gigabit Ethernet ports depending
on your configuration.
LED lights up when you press the UID button.
2 fibre channel ports. Fiber optical cable is used to
connect the frame to shared storage.
 Port 1 is used for the primary connection to
storage.
 Port 2 can be used according to your system
design.
10G SFP+ optical port connections.
 4 ports for Gigabit Ethernet
 2 ports for 10 Gigabit Ethernet
Proprietary and Confidential.
Chapter 1
Overview
September 2014 | Page 9