Removing The Server From The Rack - Imagine communications Nexio NX1011 MGX Hardware Manual

Nexio® NX1011 Series Chapter 2
Hardware Guide Rack Mounting the Chassis
2. Attach the extensions to the rear rack posts to match the depth of the racks.
3. Attach the rail to the rack posts.
4. Slide the NX1011 into the rail.
5. Attach the cables to the back panel of the device.

Removing the Server from the Rack

1. Disconnect all cables and power cords.
2. Stand in front of the device and pull it out as far as it will go.
3. On the left side, press down on the plastic retaining mechanism.
4. On the right side, pull up on the plastic retaining mechanism.
5. Carefully remove the server from the rack.
© 2014 Imagine Communications Corp. Proprietary and Confidential. September 2014 | Page 15