Ricoh Pro L5160 Operating Instructions Manual page 215

Message
"The flushing cartridge is
depleted. Replace the flushing
cartridge."
"The cleaning cartridge is
depleted. Replace the cleaning
cartridge."
"The cover is open or the lever is
off. Set the following part to the
appropriate position.
Front Cover(s)"
"The cover is open or the lever is
off. Set the following part to the
appropriate position.
Preheater Cover"
"The media holding lever is
raised. Please lower the lever."
"The roll feed unit is not set
correctly. Please reset it
correctly."
Cause
The flushing cartridge is running
low.
The flushing pad of the cleaning
cartridge is running low.
The left, center, or right cover is
open.
Pre-heater cover is open.
The media holding lever is
raised.
The roll feed unit remains pulled
out.
When Messages Appear
Solution
Replace the flushing cartridge.
For details about how to
replace the cartridge, see
page 242 "Replacing a
Flushing Cartridge".
Replace the cleaning cartridge.
For details about how to
replace the cleaning cartridge,
see page 238 "Replacing a
Cleaning Cartridge".
Close the cover.
Return the pre-heater cover to its
original position.
Push down the media holding
lever.
Reset the roll feed unit correctly.
213