Step 4: Using The Foot-Pads - Actegy REVITIVE 2836AA User Manual

Instructions for use
MAINS POWER OPTION
If you want to use REVITIVE when the battery is low or to preserve the
battery level, REVITIVE can be used by connecting it to an electrical socket.
a Locate the AC/DC power adaptor.
b Plug the small end of the power cord into the
opening on the side of REVITIVE.
c Plug the power adaptor into the nearest electrical
socket. This will start charging the (integrated)
rechargeable battery.
Once you have connected REVITIVE to the electrical socket follow Step 4
Using the foot-pads or Step 5 Using the Arthritis Pads to continue setting
up REVITIVE.
16
2910_IFU02_12517049.indd 16-17
STEP 4:
USING THE FOOT-PADS
a Get into a comfortable seated position.
Sit with
For best results sit with your knees at a 90 degree angle
both bare feet
(right angle).
on the foot-pads
b Place REVITIVE on the floor in front of you.
REVITIVE is designed to be used while seated.
Never stand on the REVITIVE unit.
c
Place both bare feet on the foot-pads.
Make sure you remove all footwear, including socks/
stockings.
d If desired, apply a moisturising lotion to the soles of
your feet.
Hint: Applying a moisturising lotion to the soles of
the feet before using REVITIVE can help improve the
delivery of electrical stimulation.
e Press the power button on the device or on the remote
control to turn REVITIVE on.
You will hear a beep and the display lights will light up.
The time will read 30 minutes and
read 00.
To turn off REVITIVE at any time during operation,
press the power button on the device or on the
remote control.
Intensity will
17
22/07/2016 09:49