Actegy REVITIVE 2836AA User Manual page 13

Instructions for use
If you feel pain or discomfort - lower the intensity of the Arthritis
Pads using either the (-) Intensity Control on the control panel of
the device or on the remote control.
You can also choose to stop therapy before the end of the 20-minute
therapy session to avoid muscle fatigue. You can do this by pressing
the power button on the control panel of the device or on the
remote control.
k The time control/display will start to count down in
minutes as REVITIVE cycles through its program.
l
When REVITIVE times out, the time display
reads 00 and you will hear three beeps.
m
REVITIVE switches itself off automatically.
n Ensuring that the device has switched itself off, then
gently peel the Arthritis Pads from the skin.
Do not pull the Arthritis Pads off the skin using
the Arthritis Pad cords as this may damage the
cords.
24
2910_IFU02_12517049.indd 24-25
o
Replace the Arthritis Pads onto their plastic liner
after use.
p Unplug the Arthritis Pad cord from the opening
on REVITIVE.
You do not need to detach the Arthritis Pads from
the Arthritis Pads cords.
25
22/07/2016 09:49