Table of Contents
Advertisement
Listening to a CD or MP3/WMA disc (continued)
Direct track search
By using the Direct Search buttons, the desired tracks on
the current disc can be played.
Use the Direct Search buttons on the remote control to
select the desired track while playing the selected disc.
● The Direct Search buttons allow you to select up to
number 9.
● When selecting number 10 or higher, use the "10+"
button.
A. For example, to choose 13
1
Press the "10+" button
once.
2
Press the "1" button.
3
Press the "3" button.
B. For example, to choose 130
1
Press the "10+" button twice.
2
Press the "1" button.
3
Press the "3" button.
4
Press the "0" button.
Notes:
● A track number higher than the number of tracks on the
disc cannot be selected.
● During random play, direct search is not possible.
To stop playback:
Press the
(CD
) button.
Repeat play
Repeat play can play one track, all tracks or a programmed
sequence continuously.
To repeat one track:
Press the PLAY MODE button repeatedly until "1-
REPEAT" appears. Press the
To repeat all tracks:
Press the PLAY MODE button repeatedly until "ALL
REPEAT" appears. Press the
To repeat desired tracks:
Perform steps 1 - 5 in "Programmed play" section on pages
6 - 7 and then press the PLAY MODE button repeatedly
until "ALL REPEAT" appears.
To cancel repeat play:
Press the PLAY MODE button repeatedly until "NORMAL"
appears and "
" disappears.
Selected track number
/ (CD
/ ) button.
/ (CD
/ ) button.
Random play
The tracks on the disc can be played in random order
automatically.
To random play all tracks:
Press and hold down PLAY MODE button on the remote
control until "RANDOM" appears. Press the
button.
To cancel random play:
Press and hold the PLAY MODE button until "NORMAL"
appears and "R" disappears.
Notes:
● If you press the
move to the track selected next by the random
operation. On the other hand, the button does not allow
you to move to the previous track. The beginning of the
track being played will be located.
● In random play, the unit will select and play tracks
automatically. (You cannot select the order of the
tracks.)
Caution:
After performing repeat play, be sure to press the
(CD
) button. Otherwise, the disc will play continuously.
Programmed play (CD)
You can choose up to 32 selections for playback in the
order you like.
1
While in the stop mode, press the MEMORY button on
the remote control to enter the programing save mode.
2
Press the
or
select the desired track.
3
Press the MEMORY button to save the track number.
4
Repeat steps 2 - 3 for other tracks. Up to 32 tracks can
be programmed. If you want to check the programmed
tracks, press the MEMORY button repeatedly. If you
make a mistake, the programmed tracks can be cleared
by pressing the CLEAR/DIMMER button.
5
Press the
/ (CD
E-6
/ (CD
button during random play, you can
buttons on the remote control to
Selected track number
/ ) button to start playback.
/ )
Advertisement
Table of Contents
