Selectingthe Fanmode - DeLonghi EV250 Instructions For Use Manual

Evaporative cooler
Hide thumbs Also See for EV250:
Table of Contents

Advertisement

Available languages

Available languages

2.3 Selectingthe fanmode

The appliance can be set for 3 different fan modes:
1. NORMAL- Press the
speed;
2. NATURAL - Press the MODE button (B4 or D5) once. The
appliance performs random ventilation cycles at different
speeds, interrupted by a few seconds of stop (fig. 10);
PAUSE
3.
SLEEP - Press the MODE button (B4 or D5) twice. The
ap- pliance runs 30 minutes at MAX speed, then 30
minutes at MED speed: then runs continuosly at MIN
speed (fig. 11).
x2
MAX
MED
min
30
9
button (B2 or D4) to select the fan
10
MIN
30
11
2.4
Swing
Press the
button (B5 or D2)once to activate the rotating
vent (fig. 12).
Press again to exit swing mode.
Thecorresponding LED turns on and off accordingly.
You can also adjust vertically the vent by lightly pushing the vent
to orientate the air flow (fig. 13): always adjust the vent when
the vent is stationary.
2.5
Auto Off
You can set the delayed shut off from 1 to 24 hours by pressing
the
button (B6 or D3).
1. Select the number relative to the operating hours desired:
the number will be shown on the display (C1);
2. symbol flashes to highlight that you are program- ming
the auto off: when the flashing stops, the auto off is set
(fig. 14);
7
12
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents