Shure Sound Isolating Series Manual page 24

THD+N
Typical
RMCE-BT1
RMCE-BT2
Frequency Response
RMCE-BT1
RMCE-BT2
Output Impedance
RMCE-BT1
RMCE-BT2
Certifications
Visit http://www.shure.com/earphones
Note: Testing is based on the use of supplied and recommended cable types. The use of other than shielded (screened) cable types may degrade EMC per­
formance.
This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking.
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
Cet équipement est conforme aux limites d'exposition aux radiations IC CNR­102 établies pour un environnement non con­
trôlé.
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
Hereby, Shure Incorporated declares that the radio equipment is in compliance with Directive 2014/53/EU. The full text of the
EU declaration of conformity is available at the following internet address:
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: +49-7262-92 49 0
Fax: +49-7262-92 49 11 4
Email: EMEAsupport@shure.de
The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by
Shure Incorporated is under license. Other trademarks and trade names are those of their respective owners.
for the latest regulatory and compliance information.
0.1%
0.02%
10 to 22,000 Hz , +- 0.5 dB
10 to 22,000 Hz , +- 0.5 dB
3.9 Ω
0.6 Ω
http://www.shure.com/europe/compliance
Shure Incorporated
24/27