Sony STR-DE897 Operating Instructions Manual page 59

Outputs (Digital)
MD/TAPE (Optical)
Equalizer
Gain levels
FM tuner section
Tuning range
Antenna
Antenna terminals
Intermediate frequency
Sensitivity
Mono:
Stereo:
Useable sensitivity
S/N
Mono:
Stereo:
Harmonic distortion at 1 kHz
Mono:
Stereo:
Separation
Frequency response
Selectivity
AM tuner section
Tuning range
Models of area code U, CA
With 10-kHz tuning scale: 530 – 1,710 kHz
With 9-kHz tuning scale: 531 – 1,710 kHz
Models of area code E2/E3
With 10-kHz tuning scale: 530 – 1,610 kHz
With 9-kHz tuning scale: 531 – 1,602 kHz
Models of area code AR
With 10-kHz tuning scale: 530 – 1,610 kHz
Antenna
Intermediate frequency
Usable sensitivity
S/N
Harmonic distortion
Selectivity
At 9 kHz:
At 10 kHz:
6)
You can change the AM tuning scale to 9 kHz or 10
kHz. After tuning in any AM station, turn off the
receiver. While holding down PRESET TUNING +
or TUNING +, press ?/1. All preset stations will be
erased when you change the tuning scale. To reset
the scale to 10 kHz (or 9 kHz), repeat the procedure.
Sensitivity: –
±10 dB, 0.5 dB step
87.5 - 108.0 MHz
FM wire antenna
75 ohms, unbalanced
10.7 MHz
18.3 dBf, 2.2 µV/75 ohms
38.3 dBf, 22.5 µV/75 ohms
11.2 dBf, 1 µV/75 ohms
76 dB
70 dB
0.3%
0.5%
45 dB at 1 kHz
30 Hz – 15 kHz,
+0.5/–2 dB
60 dB at 400 kHz
6)
6)
6)
6)
Loop antenna
450 kHz
50 dB/m (at 1,000 kHz or
999 kHz)
54 dB (at 50 mV/m)
0.5% (50 mV/m, 400 Hz)
35 dB
40 dB
Video section
Inputs/Outputs
Video:
S-video:
COMPONENT VIDEO:
80 MHz HD Pass Through
General
Power requirements
Area code Power requirements
U, CA 120 V AC, 60 Hz
E2/E3 120/220/240 V AC, 50/60 Hz
AR 220–230 V AC, 50/60 Hz
Power consumption
Area code Power consumption
U, E2/E3 300 W
CA 410 VA
AR 260 W
Power consumption (during standby mode)
AC outlets
Area code AC outlets
U, CA 2 switched, 120 W/1A MAX
E2/E3 1 switched, 100 W MAX
Dimensions (w/h/d) (Approx.)
Mass (Approx.)
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Remote commander RM-PG413 (1)
R6 (size-AA) batteries (2)
For details on the area code of the component you
are using, see page 3.
Design and specifications are subject to change
without notice.
1 Vp-p, 75 ohms
Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
Y: 1 Vp-p, 75 ohms
P /C /B-Y: 0.7 Vp-p,
B B
75 ohms
P /C /R-Y: 0.7 Vp-p,
R R
75 ohms
0.3 W (when "POWER
SAVE" in the
CUSTOMIZE menu is set
to "ON") (page 38)
430 × 157.5 × 371 mm
(16 7/8 × 6 2/8 × 14 5/8
inches) including
projecting parts and
controls
10.7 kg (23 lb 10 oz)
59 GB