Specifications - Sony STR-DE897 Operating Instructions Manual

Specifications

AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(Models of area code U only)
With 8 ohm loads, both channels driven, from
20 – 20,000 Hz; rated 100 watts per channel
minimum RMS power, with no more than
0.09% total harmonic distortion from 250
milliwatts to rated output.
Amplifier section
Power Output
Models of area code U, CA
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09%)
Reference Power Output
(8 ohms 20 Hz – 20 kHz, THD 0.09%)
2)
FRONT :
2)
CENTER :
2)
SURR :
2)
SURR BACK :
(8 ohms 1 kHz, THD 0.7%)
2)
FRONT :
2)
CENTER :
2)
SURR :
2)
SURR BACK :
Models of area code E2/E3
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7%)
Reference Power Output
(8 ohms 1 kHz, THD 10%)
2)
FRONT :
2)
CENTER :
2)
SURR :
2)
SURR BACK :
Models of area code AR
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7%)
Reference Power Output
(8 ohms 1 kHz, THD 10%)
2)
FRONT :
2)
CENTER :
2)
SURR :
2)
SURR BACK :
GB
58
1)
100 W + 100 W
1)
100 W/ch
100 W
100 W/ch
100 W/ch
110 W/ch
110 W
110 W/ch
110 W/ch
1)
110 W + 110 W
1)
130 W/ch
130 W
130 W/ch
130 W/ch
1)
110 W + 110 W
3)
100 W + 100 W
1)
130 W/ch
130 W
130 W/ch
130 W/ch
1)
Measured under the following conditions:
Area code
U, CA
E2/E3
AR
2)
Depending on the sound field settings and the
source, there may be no sound output.
3)
Measured under the following conditions:
Area code
AR
Frequency response
PHONO
MULTI CH IN 1, 2,
SA-CD/CD, TV/SAT,
MD/TAPE, DVD,
VIDEO 1, 2, 3
Inputs (Analog)
PHONO
MULTI CH IN 1, 2,
SA-CD/CD, TV/SAT,
MD/TAPE, DVD,
VIDEO 1, 2, 3
4)
INPUT SHORT (with sound field and equalizer
bypassed).
5)
Weighted network, input level.
Inputs (Digital)
DVD, SA-CD/CD
(Coaxial)
TV/SAT, SA-CD/CD,
MD/TAPE, VIDEO 3
(Optical)
Outputs (Analog)
MD/TAPE (OUT),
VIDEO 1, 2
(AUDIO OUT)
SUB WOOFER
Power requirements
120 V AC, 60 Hz
240 V AC, 50 Hz
230 V AC, 50 Hz
Power requirements
220 V AC, 50 Hz
RIAA equalization curve
±0.5 dB
10 Hz – 70 kHz
+0.5/–2 dB (with sound
field and equalizer
bypassed)
Sensitivity: 8 mV
Impedance: 50 kiloohms
4)
S/N : 86 dB
5)
(A, 8 mV )
Sensitivity: 500 mV
Impedance: 50 kiloohms
4)
S/N : 96 dB
5)
(A, 500 mV )
Sensitivity: –
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
Sensitivity: –
Impedance: –
S/N: 100 dB
(A, 20 kHz LPF)
Voltage: 500 mV
Impedance: 10 kiloohms
Voltage: 2 V
Impedance: 1 kiloohms