Sony STR-DE695 Operating Instructions Manual page 19

x Front speaker size (
• If you connect large speakers that will
effectively reproduce bass frequencies, select
"LARGE". Normally, select "LARGE".
• If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select "SMALL" to activate
the bass redirection circuitry and output the
front channel bass frequencies from the sub
woofer.
• When the front speakers are set to "SMALL",
the center and surround speakers are also
automatically set to "SMALL" (unless
previously set to "NO").
• When the sub woofer is set to "NO", the front
speakers are automatically set to "LARGE" and
you cannot change this setting.
x Center speaker size (
• If you connect a large speaker that will
effectively reproduce bass frequencies, select
"LARGE". Normally, select "LARGE".
However, if the front speakers are set to
"SMALL", you cannot set the center speaker to
"LARGE".
• If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select "SMALL" to activate
the bass redirection circuitry and output the
center channel bass frequencies from the front
speakers (if set to "LARGE") or sub woofer.*
• If you do not connect a center speaker, select
"NO". The sound of the center channel will be
output from the front speakers.*
R XXXXX)
L
C XXXXX)
1
2
x Surround speaker size
SL SR
( XXXXX)
• If you connect large speakers that will
effectively reproduce bass frequencies, select
"LARGE". Normally, select "LARGE".
However, if the front speakers are set to
"SMALL", you cannot set the surround
speakers to "LARGE".
• If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select "SMALL" to activate
the bass redirection circuitry and output the
surround channel bass frequencies from the sub
woofer or other "LARGE" speakers.
• If you do not connect surround speakers, select
3
"NO".*
Tip
*1–*3 correspond to the following Dolby Pro Logic
modes
*1 NORMAL
*2 PHANTOM
*3 3 STEREO
x Surround back speaker selection
S B
( XXX)*
You can set this parameter only when you
make SURR BACK hookup (page 16).
• If you make SURR BACK hookup, select
"YES".
• If you do not make SURR BACK hookup,
select "NO".
* These parameters are not available when "Surround
speaker size ( )" is set to "NO".
SL SR
continued
GB
19