Selecting the component (continued)
MUTING
Press MUTING on the remote to mute the
sound. Press again to cancel the muting
function. The muting function is also canceled
when you turn the power on or turn the
MASTER VOLUME to turn the volume up.
PHONES
Use to connect headphones.
• When the headphones are connected, speaker
output is automatically canceled and “SP A”
and “SP B” do not light up in the display.
• When the headphones are connected, selectable
sound fields are HP 2CH, HP MULTI or HP
THEA (page 28).
SPEAKERS (OFF/A/B/A+B)
Press SPEAKERS (OFF/A/B/A+B) to output
the sound from the speakers connected to the
SPEAKERS FRONT terminals.
Each time you press the button, the display will
light up cyclically as follows:
SP A t SP B t SP A and SP B t
No display*
To drive
Select
Speaker System A
SP A (default setting)
(Connected to the
SPEAKERS FRONT A
terminals)
Speaker System B
SP B
(Connected to the
SPEAKERS FRONT B
terminals)
Both Speaker System A
SP A and SP B
and B (Connected to the
SPEAKERS FRONT A
and B terminals)
* If you do not want to drive Speaker System A
and B, press SPEAKERS (OFF/A/B/A+B) until
“SP A” and “SP B” do not light up in the display
(no display).
GB