Changing The Factory Setting Of An Input Button - Sony STR-DE597 Operating Instructions Manual

Changing the factory
setting of an input button
If the factory settings of the input buttons do not
match your system components, you can change
them. For example, if you have a tape deck and
you do not have an MD deck, you can assign the
MD/TAPE button to your tape deck.
Note that the settings of the TUNER button
cannot be changed.
1
Hold down the input button whose
input you want to change (for example,
MD/TAPE).
2
Press the corresponding button of the
component you want to assign to the
input button (for example, 4 – Tape
deck).
The following buttons are assigned to select
the input:
To operate
CD player
DAT deck
MD deck
Tape deck A
Tape deck B
LD player
VCR (command mode VTR 1*)
VCR (command mode VTR 2*)
VCR (command mode VTR 3*)
TV
DSS (Digital Satellite Receiver)
DVD player
VCD player
*Sony VCRs are operated with a VTR 1, 2 or 3
setting. These correspond to Beta, 8mm and
VHS respectively.
Now you can use the MD/TAPE button to
control the tape deck.
To reset a button to its factory
setting
Repeat the above procedure.
To reset all the input buttons to
their factory setting
Press ?/1, AV ?/1 and MASTER VOL – at the
same time.
Press
1
2
3
4
5
6
7
8
9
0
>10
ENTER
.
GB
45