Internal Supervised Output 1 / Fan; Internal Supervised Output 2; Supervised Output Voltage; Walk Test - Keyprocessor Apollo Technical Manual

6.4 Internal supervised output 1 / FAN

When needed, the Apollo can be provided of a cooling fan.
JP3 – X4 function
Pin number
1 Relay (supervised output 1)
2
3 +12VDC (FAN) (default)
X4
Pin number Description
1 + (e.g. FAN)
2 GND

6.5 Internal supervised output 2

When needed, the Apollo can be provided of a 115db PIEZO Buzzer.
X1 – internal supervised output 2
Pin number
1 + (PIEZO Buzzer)
2

6.6 Supervised output voltage

The voltage which is needed on the supervised outputs can be set by a jumper (12/24VDC).
JP4 – supervised output voltage
Pin number
1 +24VDC (default)
2
3

6.7 Walk test

When using intrusion detectors you have the possibility to use a walk test function.
JP2 - Walk test (NO)
Pin number Description
3A
2A
1A GND (default)
Description
C
Description
GND
Description
C
+12VDC
12VDC
C
JP2 - Walk test (NC)
Pin number Description
3B 12VDC
2B
1B
C
GND