Ac Hookups; Before You Use Your Receiver - Sony STR-DE335 Operating Instructions Manual

AC Hookups

Setting the voltage selector (except for
Singapore, Malaysia, Canada and Australia
models)
Check that the voltage selector on the rear panel of the
player is set to the local power line voltage. If not, set
the selector to the correct position using a screwdriver
before connecting the AC power cord to a wall outlet.
120 V 240 V 220 V
Connecting the AC power cord
Connect the AC power cord from this receiver and
from your audio/video components to a wall outlet. If
you connect other audio components to the
SWITCHED AC OUTLET on the receiver, the receiver
can supply power to the connected components so you
can turn on/off the whole system when you turn on/
off the receiver.
VOLTAGE SELECTOR
(except Singapore,
Malaysia, Canada and
Australia models)
SWITCHED AC OUTLET
(other countries)
Caution
Make sure that the power consumption of the component
connected to the receiver's AC outlet does not exceed 100
watts. Do not connect high-wattage electrical home
appliances such as electric irons, fans, or TVs to this outlet.
Where do I go next?
Before you use the receiver, go to the next section to make
sure that all the controls are set to the appropriate positions.

Before You Use Your Receiver

Before turning on the receiver, make sure that you
have:
Before you use your receiver for the first time or when
you want to clear the receiver's memory, do the
procedure below:
1
SWITCHED AC OUTLET
2
(Singapore, Malaysia
and Australia models
only)
/
to a wall outlet
Turn on the receiver and check the following indicator.
Getting Started
• Turned MASTER VOLUME to the leftmost
position (0).
• Selected the appropriate speaker system. (See
"Selecting the speaker system" on page 8.)
• Set BALANCE to the center position.
1/u (power)
Turn off the receiver.
Press 1/u (power) for more than 4 seconds.
"INITIAL" appears in the display and the items
including the following are reset or cleared:
• All preset stations are reset to their factory
settings.
• All sound field parameters are reset to their
factory settings.
• All index names (of preset stations and
programme sources) are cleared.
• All adjustments made with the SET UP button are
reset to their factory settings.
• The sound field memorized for each programme
source and preset station is cleared.
• Press MUTING or MUTING on the remote if the
MUTING indicator turns on.
MUTING
9 US