Sony STR-DB895D Operating Instructions Manual page 65

DAB tuner section
Frequency range
Band-III:
L-Band:
Antenna
Antenna terminals
Sensitivity
Signal-to-noise ratio
THD+N
Channel separation
Selectivity
Frequency response
FM tuner section
Tuning range
Antenna
Antenna terminals
Intermediate frequency
Sensitivity
Mono:
Stereo:
Useable sensitivity
S/N
Mono:
Stereo:
Harmonic distortion at 1 kHz
Mono:
Stereo:
Separation
Frequency response
Selectivity
AM tuner section
Tuning range
With 9-kHz tuning scale
Antenna
Intermediate frequency
Usable sensitivity
S/N
Harmonic distortion
Selectivity
At 9 kHz:
174.928 (5A) –
239.200 (13F) MHz
1452.960 (LA) –
1490.624 (LW) MHz
For details, see "DAB
frequency table" on
page 66.
DAB wire antenna
75 ohms, unbalanced
–99 dBm
97 dB
0.009% (1 kHz)
87 dB (1 kHz)
40 dB (at adjacent channel)
+0.5/–0.5 dB
(5 Hz – 20 kHz)
87.5 - 108.0 MHz
FM wire antenna
75 ohms, unbalanced
10.7 MHz
18.3 dBf, 2.2 µV/75 ohms
38.3 dBf, 22.5 µV/75 ohms
11.2 dBf, 1 µV/75 ohms
76 dB
70 dB
0.3%
0.5%
45 dB at 1 kHz
30 Hz – 15 kHz,
+0.5/–2 dB
60 dB at 400 kHz
531 – 1,602 kHz
Loop antenna
450 kHz
50 dB/m (at 1,000 kHz or
999 kHz)
54 dB (at 50 mV/m)
0.5% (50 mV/m, 400 Hz)
35 dB
Video section
Inputs/Outputs
Video:
S-video:
COMPONENT VIDEO:
General
Power requirements
Area code
CEL, CEK
Power consumption
Area code
CEL, CEK
Power consumption (during standby mode)
Dimensions (w/h/d) (Approx.)
Mass (Approx.)
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
DAB wire antenna (1)
Remote commander RM-AAP002 (1)
R6 (size-AA) batteries (2)
AC power cord (1)
For details on the area code of the component you
are using, see page 2.
Design and specifications are subject to change
without notice.
1 Vp-p, 75 ohms
Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
Y: 1 Vp-p, 75 ohms
P /C /B-Y: 0.7 Vp-p,
B B
75 ohms
P /C /R-Y: 0.7 Vp-p,
R R
75 ohms
80 MHz HD Pass Through
Power requirements
230 V AC, 50/60 Hz
Power consumption
290 W
0.3 W
397 × 160.5 × 430 mm
including projecting parts
and controls
13.5 kg
continued
65 GB