Enjoying Higher Fidelity Sound; Auto Format Direct - Sony STR-DB895D Operating Instructions Manual

Enjoying higher fidelity
sound

— AUTO FORMAT DIRECT

The Auto Format Direct (A.F.D.) mode allows
you to select the decoding mode you want for
your audio sound.
A.F.D. mode
(Display)
A.F.D. AUTO
(A.F.D. AUTO)
PRO LOGIC
(DOLBY PL)
PRO LOGIC II MOVIE
(PLII MV)
PRO LOGIC II MUSIC
(PLII MS)
PRO LOGIC II GAME
(PLII GM)
PRO LOGIC IIx MOVIE
(PLIIX MV)
PRO LOGIC IIx MUSIC
(PLIIX MS)
PRO LOGIC IIx GAME
(PLIIX GM)
Neo:6 Cinema
(NEO6 CIN)
Neo:6 Music
(NEO6 MUS)
MULTI STEREO
(MULTI ST.)
Decoding mode
As encoded
Dolby Pro Logic
Dolby Pro Logic II
Dolby Pro Logic IIx
DTS Neo:6
Decoding the input audio
signal automatically
In this mode, the receiver automatically detects
the type of audio signal being input (Dolby
Digital, DTS, standard 2 channel stereo, etc.)
and performs the proper decoding if necessary.
This mode presents the sound as it was recorded/
encoded, without adding any surround effects.
However, if there are no low frequency signals
(Dolby Digital LFE, etc.) it will generate a low
frequency signal for output to the sub woofer.
Press A.F.D. repeatedly to select "A.F.D.
AUTO".
The receiver automatically detects the type of
audio signal being input and performs the proper
decoding if necessary.
Tip
In most cases, "A.F.D. AUTO" provides the most
appropriate decoding. You may want to use SURR
BACK DECODING (page 39) to match the input
stream to the mode you prefer.
continued
35 GB