The Radio; Presetting Radio Stations - Sony PMC-MD55 Primary Operating Instructions Manual

Boomboxes: md boombox
Hide thumbs Also See for PMC-MD55 Primary:
Table of Contents

Advertisement

The Radio

Presetting radio
stations
You can store radio stations into the
player's memory. You can preset
up to 20 stations, 10 for each band in
any order.
On the remote
1 Press BAND until the
band you want
appears in the
display.
2 Press TUNE + or –
until you tune in the
station you want.
3 Hold down the
number button that
you want to preset
the new station on
for 2 seconds.
1
Press RADIO BAND until the band you want
appears in the display.
2
Hold down AUTO PRESET until "Auto Preset"
flashes in the display.
The stations are stored in memory from the lower
frequencies (from the preset number 1, in
numerical order) as long as the station has a signal
strong enough.
When you've done presetting, the station stored in
the preset number 1 will be tuned in automatically.
If a station cannot be preset automatically
You need to preset a station with a weak signal
manually. Also, when you want to replace preset
stations with a new one, proceed as follows:
1 Press RADIO BAND until the band you want
appears in the display.
2 Press TUNE + or TUNE – repeatedly until you
tune in the station you want, and then, hold down
YES•ENTER for 2 seconds.
3 Select the preset number you want to preset the
new station on by turning the jog dial.
4 Press YES•ENTER.
The new station replaces the old one.
RADIO BAND
Jog dial
AUTO
PRESET
YES
ENTER
continued
23
The Radio

Advertisement

Table of Contents
loading

Table of Contents