Welcome Thanks for buying this Magenta HD-One DX or DX500. The Magenta HD- One DX/DX500 series of video extenders extends HDMI or DVI signals over category 5e/6/6a/6e/7 cable. The Magenta HD-One DX/DX500 does not support distribution through an Ethernet network. Do not connect your unit to any sort of networking or telecommunications equipment.
Quick start 1. Connect and then your DX or DX 500 units. At the transmitter end: a. Connect the video source to the HDMI INPUT port on the HD-One DX/DX500 transmitter. Use an HDMI type A cable. If you have a DVI source use, an HDMI to DVI adapter.
▪ If you use protected content, check all your connected devices are HDCP compliant. ▪ Check that you haven’t exceeded the maximum distance. ▪ Use a higher quality cable. ▪ Disable deep color on your video source. ▪ Reduce the resolution of your source. tvONE...
My video is poor quality ▪ Check that the Ethernet cable is terminated to the T568B wiring standard. ▪ Check for faulty or poor-quality HDMI cables. ▪ Ensure the display is compatible with the source. ▪ Try an alternative source. ▪...
F/UTP‡ type Category cable must be used. This equipment has more than one interface connector, do not leave cables connected to unused interfaces. Any unauthorized changes or modifications to this equipment could void the user’s authority to operate it. tvONE...
Need help?
Do you have a question about the Magenta HD-One DX and is the answer not in the manual?
Questions and answers