Advertisement
USB 2.0 Fiber Optic
KVM Extender System
Quick
Start
Guide
USB
Before you get started, ensure that all the drivers required for your USB device(s) are installed.
Place Extenders where desired and Insert your SFP into the CPU and REMOTE
1
transceiver. Then connect the Fiber Extension cable to both end points
A
(LC-LC crossover duplex cable not included)
Max 10KM via Singlemode Fiber (upgraded Singlemode SFP required)
2
Connect the CPU Transceiver to the computer using the included USB cable.
Computer
Note: Power adapter is not required at the local extender for normal operation.
Link
B
Link
A
B
Max 500m via Multimode Fiber
Link
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Tvone Voyager USB
Summary of Contents for Tvone Voyager USB
- Page 1 Before you get started, ensure that all the drivers required for your USB device(s) are installed. Place Extenders where desired and Insert your SFP into the CPU and REMOTE transceiver. Then connect the Fiber Extension cable to both end points USB 2.0 Fiber Optic Link KVM Extender System...
- Page 2 Connect the REMOTE Transceiver to the AC adapter and plug into a power source. Link Attach USB device(s) to the REMOTE Transceiver Features: Transparent USB extension True plug and play; no software drivers required Works with all major operating systems: Windows®, Mac OS X®, and Linux® www.tvone.com CSG-VGUSB...
Need help?
Do you have a question about the Voyager USB and is the answer not in the manual?
Questions and answers