Playing Only The Tracks In The Desired Group - Sony MXD-D400 Operating Instructions (primary manual) Operating Instructions Manual

Other operations
To Do this
Cancel Program PlayPress PLAY MODE in stop
mode repeatedly until both
"PROGRAM" and "SHUFFLE"
disappear.
Press . or > repeatedly (or
Check the program
order turn AMS) in pause mode.
Select the desired Press number buttons instead of
tracks using the performing steps 3 – 4.
number buttons
Add a track to the Perform steps 3 – 4 in stop mode.
end of the program
Press
Program an MP3
(or press
AMS
step 3.
Erase the program Press CLEAR in step 4. Each
time you press the button, a track
is cleared from the end of the
program.
Tips
• The program you made remains after Program Play
finishes. To play the same program again, press H.
However, the program is cleared when you open the
disc tray, eject the MD or pull out the power cord.
• "– – –:– –" appears when the total playing time of the
CD exceeds 100 minutes or when the total playing
time of the MD exceeds 1,000 minutes.
• "– – –:– –" appears when the MP3 files are
programed. The total playing time cannot be
displayed during MP3 Play.
or +
ALBUM/GROUP –
, then turn
ALBUM
) to select album, before
Playing only the tracks in
the desired group
This function allows you to listen only to your
favorite tracks which you have registered into a
group. For details of the Group Function, see
"Registering tracks in groups" on page 31.
1
2
5
4
1
Set to MD in CD MD select switch.
2
Press GROUP ON/OFF in stop mode
repeatedly until "GROUP ON" appears.
3
Press ALBUM/GROUP – or + (or
GROUP SKIP) repeatedly until the
desired group appears.
4
To start playing from a specific track in
the group, press . or >
repeatedly (or turn AMS) until the
desired track appears.
Proceed to step 5 when you start playing
from the first track in the group.
5
Press H.
Playback starts.
When the playing of the last track in the
group finishes, the MD deck stops
automatically.
3
continued
GB
15