Related Manuals for Glensound GS-MPI005HD MKII
Summary of Contents for Glensound GS-MPI005HD MKII
- Page 1 GS-MPI005HD MKII HD Voice Broadcaster’s Mobile Phone subrack PRODUCT DETAILS 6 BROOKS PLACE, MAIDSTONE, KENT, ME14 1HE. ENGLAND. TEL: +44 (0) 1622 753662 Visit our Website at www.glensound.com FAX: +44 (0) 1622 762330...
- Page 2 Glensound Electronics Ltd Thank you for choosing a new Glensound product. All rights reserved. Information contained in this manual is subject to change without notice, if in doubt please contact us for the latest product information. If you need any help with the product then we can be contacted at: Glensound Electronics Ltd 1 –...
-
Page 3: Product Warranty
PRODUCT WARRANTY All equipment is fully tested before dispatch and carefully designed to provide you with trouble free use for many years. We have a policy of supporting products for as long as possible and guarantee to be able to support your product for a minimum of 10 years. For a period of one year after the goods have been despatched the Company will guarantee the goods against any defect developing after proper use providing such defects arise solely from faulty materials or... -
Page 4: Eu Declaration Of Conformity
HD Voice Mobile Phone Rack This declaration of conformity is issued under the sole responsibility of the manufacturer. This equipment is manufactured by Glensound Electronics Ltd of Brooks Place Maidstone Kent ME14 1HE is marked and conforms to the following Union harmonisation legislation:... -
Page 5: Rohs Directive
RoHS DIRECTIVE RoHS 2 Directive 2011/65/EU restricts the use of the hazardous substances listed below in electrical and electronic equipment. This product conforms to the above directive and for these purposes, the maximum concentration values of the restricted substances by weight in homogenous materials are: Lead 0.1%... -
Page 6: Waste Electrical And Electronic Equipment Regulations 2006 (Weee)
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT REGULATIONS 2006 (WEEE) Glensound Electronics Ltd is registered for business to business sales of WEEE in the UK our registration number is: WEE/JJ0074UR Page 6 of 51... -
Page 7: Conformity Statement For
CONFORMITY STATEMENT FOR: Gemalto Module PLS8-E to which this declaration relates, is in conformity with the following standards and/or other normative documents, by specific reference to the essential requirements of Radio Equipment Directive 2014/53/EU: Health and Safety EN 60950-1 :2006+A11 :2009+A1 :2010 +A12:2011+A2:2013;... -
Page 8: Table Of Contents
GLENSOUND GS-MPI005HD MKII HANDBOOK CONTENTS Issue 2 Description Page No. Contents PRODUCT WARRANTY ......................... 3 EU DECLARATION OF CONFORMITY ....................4 RoHS DIRECTIVE ..........................5 WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT REGULATIONS 2006 (WEEE)....6 CONFORMITY STATEMENT FOR: ....................... 7 Gemalto Module PLS8-E ........................7 Gemalto Module PLS8-US R4 ...................... - Page 9 OPTIONAL DANTE®/ AES67 NETWORK INTERFACE ..............35 Dante Circuit Names ......................... 35 Getting Dante Controller ........................36 Connecting GS-MPI005HD MKII To the Network ................36 Audio Over IP Network ........................36 Running Dante Controller ........................37 Dante Controller TIP .......................... 38 Device Not Showing Up In Dante Controller ..................
-
Page 10: Overview
It builds on previous generations of GS-MPI005 mobile phone subracks. Each GS-MPI005HD MKII can be fitted with one or two phone modules each phone module can be either a 900MHz (European) or 850MHz (US) varient. Both versions work in other countries as well as ‘Europe’... -
Page 11: Front Panel Layout
FRONT PANEL LAYOUT 2. Touchscreen 3. Headphone 1. Sim Card Slot Socket 5. Control Shaft 6. USB Update 4. Recessed Reset encoder socket Button 1. Sim Card Slot The sim card slot accepts Micro sim cards. These should be inserted with the electrical contacts facing down. - Page 12 It is used for updating the devices firmware (the software that runs on the internal microprocessors and makes it work). 5. Recessed Reset Button This button should only ever be used if advised to by Glensound’s technical support team. The button itself is recessed about 13mm inside the unit and requires a straight narrow firm object (such as a straightened paper clip) to operate it.
-
Page 13: Rear Panel Layout
REAR PANEL LAYOUT 3. Line Out 5. Ant B 1. Ethernet 6. Dante Network 2. Ant A 4. Line In 7. Handset 8. DC Loops 9. Mains 1. Ethernet Connector The Ethernet connector is fitted for future use. It is envisaged that a webpage will be provided for remote control of the device in due course (our hopeful aim is to have this ready by summer 2019 but this time frame cannot be guaranteed). - Page 14 Please note the Dante Network interface board is an optional item and is only fitted if by Glensound if ordered at the same time as the GS-MPI005HD MKII. It is possible to order this interface and fit it retrospectively yourself at a later date.
-
Page 15: Making A Call
MAKING A CALL There are 3 ways of making a call, the most common ways are using the touchscreen or the optional telephone handset. The 3 way is to use a GPI to dial a contact (see GPIO menu). Using the Touchscreen 1) Press the ‘Mobile’... -
Page 16: Using The Optional Handset Interface
Using the Optional Handset Interface 1) Pick up the handset (The dialling keypad will appear on the touchscreen) 2) Enter the number to call on the handset 3) Wait for the call to initiate ANSWERING A CALL There are 3 ways of answering a incoming call, the most common ways are using the touchscreen or the optional telephone handset. -
Page 17: Diverting/ Transferring A Call Between The Handset & Xlrs
DIVERTING/ TRANSFERRING A CALL BETWEEN THE HANDSET & XLRs The audio to/ from the mobile phone only ever appears on either the optional handset interface or the rear panel XLRs (or the Dante® network audio equivalent of the above). It never appears on both circuits at the same time. When you make or answer a call the audio will automatically appear on the circuit that you use. - Page 18 If you’ve answered the call on the touchscreen you’ll see this option If the handset is currently on hook it will ring and the audio won’t transfer until the handset has been answered. NOTE: It is possible to set a GPI to divert/ transfer the call between the 2 circuits. Please see the GPIO section of this handbook for more details.
-
Page 19: Sending Dtmf To The Line
SENDING DTMF TO THE LINE It is possible to send DTMF tones to the mobile phone circuit. DTMF can be sent either from the touchscreen or from the optional telephone handset. Using the Touchscreen From the Call in progress screen select the keypad icon The keypad will be then be displayed. -
Page 20: Using The Touchscreen/ Menus
USING THE TOUCHSCREEN/ MENUS The touchscreen is a resistive touch type. This means that it needs a slightly more firm push to operate than an average domestic mobile phone that uses a capacitive touchscreen. Resistive touchscreens generally work well when operated by a stylus/ pen. Home Screen Name of Telecom Indication of RF... -
Page 21: Mobile Icon
Mobile Icon The mobile icon provides access to making calls. When you press it a call history list first appears: Click here to go to Click here to open a your contacts keyboard Indicates an Click here to return incoming (or the call outgoing call) If the ‘KBD’... -
Page 22: Contacts Icon
Contacts Icon The contact icon provides access to a simple contact list and is ideal for storing regularly used numbers. When entering the contact menu you will see a list of stored contacts, you can scroll up/ down through this list using the touchscreen. Press this Icon to add a new contact Select here to have the... -
Page 23: Adding A Contact
Adding a Contact The adding a contact menu is often best operated using a stylus or firm object such as a pen (with the tip retracted). The list of letters and numbers can be scrolled through (left / right) using the touchscreen. -
Page 24: The Settings Icon
The Settings Icon Pressing the settings Icon allows access to the settings menu. You can scroll up/ down through the settings options, the available options are: Network Display Sounds Auto answer enable Call transfers divert to Dante only NOT handset handset is disabled MAC Address About Select the setting that... -
Page 25: Network Settings Options
Network Settings Options There are just 4 options in the network settings menu. The default option should always be ‘Auto’ whereby the phone will try to lock onto 4G and then only try to lock onto 3G or 2G if the there is no 4G (or 3G) signals available. If you select the 2G, 3G or 4G options then this forces the phone only to try to communicate on that type of network circuit. -
Page 26: Display Settings
Display Settings Just two options are available when in the display settings menu. When adjusting the Brightness of the display a fader appears on the screen. This fader can be operated either by using the touchscreen or by using the ‘Control Shaft Encoder’... -
Page 27: Sound Settings
Sound Settings The Sound Settings menu provides access to the incoming call sounder volume and options to enable the sounder and the external telephone handset ringer. Internally fitted to the PCB each phone module has a sounder. This sounder can be used to indicate an incoming call. -
Page 28: Auto Answer Enable
Auto answer enable The tick box for the auto answer enable option in the settings menu is designed to be simple and easy to use. If the tick box is ‘ticked’ then the GS-MPI005HD will answer an incoming call automatically and if it is not ticked then you must manually answer the call. Call transfers divert to Dante only NOT handset The tick box for this option disables the handset. -
Page 29: About
About The About settings page provides useful information. FW stands for Firmware and is the software version currently installed This is the mobile phones unique IMEI number If a SIM card is installed this is its telephone number Page 29 of 51... -
Page 30: Output Levels
Output Levels The output levels menu allows you to alter the audio levels being sent to various circuits within the unit. Use the touchscreen to scroll up/ down to see all the options Options and brief descriptions are below: HEADPHONES This is the headphone volume setting, although the headphone volume can be altered from this menu it can also be altered at any time by adjusting Control Shaft Encoder... -
Page 31: Gpio Menu
GPIO Menu This menu provides access to the GPIO (General Purpose Input and Output) circuits. There are 5 GPIO circuits which are provided on the rear panel D connector and each of the circuits can be set as an input or an output (for connection information see the wiring section at the end of the manual). - Page 32 Choose the event to be associated with the selected GPIO The Input Options are: DIAL NUMBER ANSWER/ HANGUP ANSWER HANGUP MUTE RINGERS INPUT EVENTS (GPI) GPI TYPE DIAL NUMBER Momentary If you select this then the contacts list will open to select who to call ANSWER/HANGUP Momentary Triggering this will answer an incoming...
- Page 33 RISING EDGE/ FALLING EDGE GPI When setting a GPI an options screen asks if the input trigger should be a ‘RISING EDGE’ or a ‘FALLING EDGE’ RISING EDGE: Use this option if you want to trigger the GPI event when you disconnect the GPI’s input from ground.
-
Page 34: Headphone Menu
Headphone Menu The headphone mixer menu allows you to select which source(s) and at what level it/they are sent to the front panel headphone output. To enable a source to be routed to the headphones then first the tick box next to that source must be made. -
Page 35: Optional Dante®/ Aes67 Network Interface
OPTIONAL DANTE®/ AES67 NETWORK INTERFACE The optional Dante®/ AES67 network interface can be factory fitted or retro fitted at a later stage if required. The interface uses Audinate’s ultimo chipset which provides 4 bi-directional network audio channels at 48kHz. The ultimo chipset is also AES67 compliant. The 4 network audio channels are split 2 for each phone module. -
Page 36: Getting Dante Controller
Getting Dante Controller If you are connecting the GS-MPI005HD MKII to a new Dante network the first thing you will need to do is to get the free Dante controller software from Audinate. This can be downloaded by visiting Audinate’s web site at www.audinate.com... -
Page 37: Running Dante Controller
At the time of writing this manual the Dante Controller looks as per the screenshot below: The GS-MPI005HD MKII will have been named at the factory during test to allow them to be identified by the Dante controller. The format used for the factory name is: ‘MPI005HD-sn-XXX’... -
Page 38: Dante Controller Tip
The unit may be renamed in Dante controller by opening the ‘Device view’ window and selecting MPI005HD in the drop-down menu. Go to the ‘Device Config’ tab and change the name with the Rename Device box. Note if you upload a new DNT file or clear the devices config then the name will change to MPI005HD-xxXxXx whereby the ‘X’s refer to the devices MAC address. -
Page 39: Device Not Showing Up In Dante Controller
Device Not Showing Up In Dante Controller If your Dante device does not show up in Dante Controller then the most likely issue is that the device’s IP Address is not appropriate for your network. A) It maybe that the device is set to obtain an IP address automatically using DHCP (this is the default configuration) and your network is setup for fixed IP addresses only and does not have a DHCP server. -
Page 40: Aes67 Mode
Audinate. Turning On AES67 Mode If you want to use your GS-MPI005HD MKII on an AES67 network and it has not been set to AES67 mode then this can be set in Dante controller by double clicking the MPI005HD to open the Device View window where you will find an AES67 tab to enable AES67 support. -
Page 41: Sending Aes67 Audio
Sending AES67 Audio To transmit AES67 audio to the network a multicast flow must first be setup. This is done by selecting the ‘Create New Multicast Flow’ Icon in the Device View. Tick the AES67 Flow check box, then select up to 8 channels to be included in the flow then click ‘Create’... -
Page 42: Receiving Aes67 Audio
Receiving AES67 Audio Once a compatible AES67 stream is detected on the network by Dante Controller the AES67 flows will appear in the Dante Transmitters section in the Routing tab. AES67 Restrictions AES67 flows can only be generated with the following constraints: ... -
Page 43: Updating Firmware
Figure 1 Example filename 3. Connect To A PC Connect the GS-MPI005HD MKII to the PC via the USB cable. The micro USB connector is located on the front panel of the GS-MPI005HD MKII under the SIM card slot. - Page 44 USB device. 5. Loading the firmware Now open DfuSe Demo. If the GS-MPI005HD MKII successfully entered DFU mode then it will appear as ‘STM Device in DFU Mode’ under the ‘Available DFU Devices tab’. Figure 3 Device successfully recognised Now the .dfu file needs to be selected so that DfuSe Demo knows the correct...
- Page 45 Figure 4 Choose .dfu file Click choose and then select the .dfu file that you downloaded from the Glensound website. This will be located in your downloads folder by default. If the file loads successfully then it will read along the bottom ‘File correctly loaded’.
- Page 46 6. Upgrading the GS-MPI005HD MKII firmware The firmware is now ready to be put on to the STM32 Device. Tick the ‘Verify after download’ box first and then click ‘Upgrade’. Figure 6 Upgrade Click yes to proceed. Figure 7 Start upgrade The progress bar along the bottom will show the status of the operation.
- Page 47 If the operation was successful, DfuSe Demo will report that “Targery 00: Verify Successful!”. You may also see that it will report how much data was successfully transferred. Figure 9 Successful upgrade! 7. Final steps Now click “Leave DFU mode” to finish the procedure. Figure 10 Final step You may now disconnect the USB cable and continue to use the GS- MPI005HD MKII with the freshly updated firmware!
-
Page 48: Updating The Ultimo Chipset
Dante/ AES67 network audio streams. There is one Ultimo Chipset in each GS-MPI005HD MKII. We supply special code (a .dnt file) that sets up/ initiates the Ultimo Chipset and makes it work in particular way that is compatible to the GS-MPI005HD MKII. -
Page 49: Wiring Information
WIRING INFORMATION XLR & JACK Wiring STANDARD XLR AUDIO PINOUTS: 1: Ground/ Earth XLR SOCKET (FEMALE) 2: INPHASE/ POSITIVE/ MIC + 3: MATE/ NEGATIVE/ MIC - STANDARD HEADPHONE WIRING: TIP: A/ LEFT Ear XLR PLUG (MALE) RING: B/ RIGHT Ear SLEEVE: Common/ Earth RING SLEEVE... -
Page 50: D9 Wiring & Loop Interconnecting To External Equipment
Maximum external equipment 4) Loop 4 voltage: 50 Volts 9) Ground/ Earth 5) Loop 5 CONNECTING LOOP OUT TO A LOGIC INPUT CONNECTING LOOP OUT TO AN OPTO ISOLATOR INSIDE GS-MPI005HD MKII EXTERNAL EQUIPMENT INSIDE GS-MPI005HD MKII EXTERNAL EQUIPMENT MICRO MICRO MICRO... -
Page 51: Handset Connector
Handset Connector Connector type fitted: 6P6C (Often referred to as RJ11) Wiring: Pin 3 = Ring Pin 4 = Tip Page 51 of 51...