Messages - Sony MHC-RG550 Operating Instructions Manual

Tape deck
The tape does not record or play, or there is a
decrease in sound level.
• The heads are dirty. Clean them (page 35).
• The record/playback heads are magnetised.
Demagnetise them (page 35).
The tape does not erase completely.
• The record/playback heads are magnetised.
Demagnetise them (page 35).
There is excessive wow or flutter, or the sound
drops out.
• The capstans or pinch rollers are dirty. Clean them
(page 35).
Noise increases or the high frequencies are
erased.
• The record/playback heads are magnetised.
Demagnetise them (page 35).
The tape does not record.
• No cassette is loaded. Load a cassette.
• The tab has been removed from the cassette.
Cover the broken tab with adhesive tape
(page 35).
• The tape has wound to the end.
If the system still does not
operate properly after performing
the above measures, reset the
system as follows:
1
Disconnect the power cord.
2
Reconnect the power cord.
3
Press x, GROOVE and ?/1 at the same
time.
4
Press ?/1 to turn on the system.
The system is reset to the factory settings. You
should set the settings you made, such as the
preset stations, clock, and timer.

Messages

One of the following messages may appear or
flash in the display during operation.
CD/MP3
NO DISC
There is no disc in the player or you have loaded a
disc that cannot be played on this system (such as
DVD, VCD, or CD-ROM without MP3 audio
tracks, etc.).
OVER
You have reached the end of the disc while pressing
M during playback or pause.
GB
33