Focon Showtechnic Expolite Tour-Stick Neo 4 XAL User Manual page 32

Choose Run Mode
MENU
PERSON RUN
The operating mode is set in menu RUN, submenu RUN MODE. For operation on a DMX-controller
DMX512 needs to be set. For operation via ArtNet ARTNET needs to be set. In mode ARTNET TO
DMX the choosen universe of the ArtNet input is sent to the XLR connectors. SLAVE sets the fixture
into slave mode.
Edit User Programs
MENU
PERSON RUN
In the menu RUN, submenu EDIT the user programs PROGRAM.01 to PROGRAM.10 can be edited.
Every program can have up to 30 steps (scenes). Every step persists of the parameter colours
RGBAL, STROBE „0-25Hz", TIME and FADE. User programs can be transfered to other fixtures (see
master/slave)
Step-by-step programming of the custom stand-alone programs with up to 30 different steps.
NOTE: For less than 30 steps the TIME and FADE of the last step needs to be set to 0.
Example for time settings of a stand-alone programm with 3 steps:
RUN MODE PERSON DMX512 HSIC
HSIC ARTNET
ARTNET TO DMX HSIC
HSIC SLAVE
HSIC EDIT PROGRAM.01
PROGRAM.02
o
o
o
PROGRAM.10
Step 1 TIME = 4 FADE = 3
Step 2 TIME = 5 FADE = 2
Step 3 TIME = 0 FADE = 0
E-32
SCENE-01 RED
SCENE-02 GREEN
o
BLUE
o
AMBER
o
SCENE-30 LIME
STROBE
TIME
FADE
USE = YES
USE = YES
USE = YES
R.0-255
G.0-255
B.0-255
A.0-255
L.0-255
S.0-255
T.0-255
F.0-255