Focon Showtechnic Expolite Tour-Stick Neo 4 XAL User Manual page 34

MENU
PERSON SETTING
NETWORK SETTINGS (NETWORK):
NET SWITCH: activates/deactivates the integrated ArtNet node.
IP MODE: submenu for setting the ip-address. Users can choose between DEFAULT IP or
CUSTOM IP. If set to CUSTOM IP the users needs to set a custom ip in the next step.
CUSTOM IP EDIT: in this menu a user defined ip-address can be set.
UNIVERS: the universe of the ArtNet node is set.
KEY: In the menu KEY the password protection of the fixture is activated or deactivated. If set ON the
fixture is password protected when started. 30 seconds after the last setting the menu is locked
again. To be able to make changes in the menu the password UP - DOWN - UP - DOWN - ENTER
needs to be typed in.
Calibration and Whiteadjustment (CALIB.CCT):
WHITE: In the submenu WHITE the colour temperatures for the white values are stored. These are
mixed from the parameters Red (R.), Green (G.), Blue (B.), Amber (A.) and Lime (L.).
CALIB.RESET: To reset the changes made to the colour temperature presets to factory default, the
setting CALIB.RESET needs to be confirmed with the default password UP - DOWN - UP - DOWN -
ENTER.
RGBW: In the menu RGBW a custom colour calibration is stored which limits the maximum
brightness of the colour channels Red (R.), Green (G.) and Blue (B.) at the DMX value "255".
NOTE: The maximum value can be limited to 0. In this case, a colour channel does not respond to a
sent DMX value, which can be misinterpreted as a device error.
NETWORK
****
HSIC KEY
CALIB.CCT HSIC
E-34
OFF
NET SWITCH
ON
IP MODE DEFAULT IP
CUSTOM IP
CUSTOM IP SET XX.XX.XX.XX
UNIVERS
ON
OFF
****
WHITE
1800K
2200K
o
o
o
10000K
CALIB.RESET
****
RGBW
R.0-255
G.0-255
B.0-255
ADDRXXX
R.0-255
G.0-255
B.0-255
A.0-255
L.0-255