LIGHT
If the light won't turn on, ensure that the plug is connected at the bottom of the control
box (Figure 12).
ACCESSING ELECTRICAL COMPONENTS
1.
Disconnect machine from power; remove the safety key.
2.
Unplug light located under the cover (Figure 11).
3.
Remove (4) bolts – 2 on the side, 2 on the top – on cover.
4.
Remove cover.
5.
Remove (4) screws – 2 on the top near controls, 2 on the bottom – from control
panel.
6.
Remove control panel to gain access to electrical components (Figure 13).
13
Maintenance
FIG. 12
FIG. 13