Getting Started Step 1: Hooking Up The System - Sony MHC-NX1 Operating Instructions (primary manual) Operating Instructions Manual

Getting Started
Step 1: Hooking up the system
Do the following procedure 1 to 5 to hook up your system using the supplied cords and
accessories.
If you set up the stereo system vertically
Be sure to place the A/V control amplifier on top of the CD player/stereo cassette deck.
FM antenna
AM loop antenna
1
3
4
5
2
2
2
Front speaker (Right)
Front speaker (Left)
Note on installing
Be sure to place the A/V control amplifier on top as shown in the illustration. When the A/V control amplifer
is placed under the CD player/stereo cassette deck, noise may be produced when playing tapes.
4