Optional Components; Connecting Audio Components - Sony MHC-M500AV Operating Instructions (primary manual) Operating Instructions Manual

Optional Components

Connecting audio
components
To enhance your system, you can connect optional
components. Refer to the instructions of each
component.
Connecting an MD deck
Select one of the following two connections,
depending on the equipment to be connected and
method of recording.
Connecting an MD deck for
digital recording
You can record from CD into the MD deck
digitally by connecting an optical cable.
To the DIGITAL IN jack of the MD deck
44
Connecting an MD deck for
analog recording
Make sure to match the color of the plugs and the
connectors. To listen to the sound of the connected
MD deck, press FUNCTION repeatedly until
"MD" appears.
To the audio output of the MD deck
Note
If you cannot select "MD" even when you have
pressed FUNCTION, press ?/1 while holding down
FUNCTION when the power is turned off. "VIDEO"
will be switched to "MD." To return to "VIDEO," do
the same procedure.
Tip (MHC-M500AV/M300AV only)
When you connect a Sony MD deck, you can use the
MD H, X, and x buttons on this system's remote to
perform play, pause, and stop operations.