Table of Contents
Advertisement
Other operations
To
Check the setting
Change the setting
Cancel the timer
Notes
• You cannot activate the Daily Timer and recording
timer at the same time.
• If you use the recording timer, the Daily Timer and
the Sleep Timer at the same time, the Sleep Timer
has priority.
• If the system is on at the preset time, the timer-
recording will not be activated.
• The volume is reduced to minimum during
recording.
GB
22
Do this
1
Press CLOCK/TIMER
SELECT.
.
>
2
Press
or
repeatedly until "REC
SELECT" appears, then
press ENTER.
Start over from step 1.
1
Press CLOCK/TIMER
SELECT.
.
>
2
Press
or
repeatedly until "TIMER
OFF" appears, then press
ENTER.
Display
Turning off the display
— Power Saving Mode
The demonstration display (display window and
buttons lighting and flashing even when the
system power is off) and the clock display can
be turned off to minimize the amount of power
consumed during standby (Power Saving
Mode).
Press DISPLAY repeatedly while the
system is off until the demonstration
display or the clock display disappears.
To cancel Power Saving Mode
Press DISPLAY while the system is off. Each
time you press the button, the display switches
cyclically as follows:
Demonstration display t Clock display* t
No display (Power Saving Mode)
* The clock is displayed only if you set the clock.
Note
You cannot perform the following operations in Power
Saving Mode.
– setting the clock
– changing the AM tuning interval (except for
European, Russian, Middle Eastern and Philippine
models)
– turning on the system by pressing the function
buttons
Tip
The timer continues to operate in Power Saving Mode.
Hide quick links:
Advertisement
Table of Contents
