How To Enter Self Diagnosis Display - Sony KDL-43W7 C Series Service Manual

Service Adjustment

How to Enter Self Diagnosis Display

Go to Self diagnosis history through Service Mode
1. Go to TV standby condition by remote commander.
2. Press "i+ (info)", "5", "Volume+" then "TV power" on remote.
3. Select "Self diagnosis history" by pressing "→" button
4. You can see Self Check.
Service Mode
Model Information
Self diagnosis History
Video / Audio
Panel / PQ
General Setting
Tuner
Wifi / BT
SDB Service Menu
[</>] Set [Home]Exit
** There will be no Self Diagnosis function for TU_DEMOD. However, TU_DEMOD item will
remain in Self Diagnosis Display, the value count will not increase.
>>
>>
>>
>>
>>
>>
>>
>>
SELF CHECK
Back
002 MAIN_POWER 000000000000 000000000000 000000000000
003 DC_ALERT 000000000000 000000000000 000000000000
003 AUD_ERR 000000000000 000000000000 000000000000
003 HDMI_EQ 000000000000 000000000000 000000000000
003 TU_DEMOD 000000000000 000000000000 000000000000
004 LD_ERR 000000000000 000000000000 000000000000
004 BCM_ERR 000000000000 000000000000 000000000000
005 TCON_ERR 000000000000 000000000000 000000000000
005 P_ID_ERR 000000000000 000000000000 000000000000
005 FRCTC_I2C 000000000000 000000000000 000000000000
006 BACKLIGHT_ERR 000000000000 000000000000 000000000000
007 TEMP_ERR 000000000000 000000000000 000000000000
007 4KBE_ERR 000000000000 000000000000 000000000000
008 SW_ERR 000000000000 000000000000 000000000000
00000 00000 00000 [Home]Exit
<<
000
000
000
000
000
000
000
000
000
000
000
000
000
000
86