Table of Contents
Advertisement
1
Press DOLBY PROLOGIC (or PRO
LOGIC ON/OFF on the remote).
"PRO LOGIC ON" appears.
2
Press T.TONE ON/OFF on the
remote.
The test tone is heard from the speakers
in the following order. Adjust the
volume of the test tone.
Front (left) n Center n Front (right)
3
From your listening position, press
CENTER +/– and REAR +/– on the
remote to adjust the volume.
The volume levels from each speaker
must become the same.
4
Press T.TONE ON/OFF when you
are done adjusting.
The test tone turns off.
Tip
If you turn VOLUME (or press VOL +/– on the
remote) all the speaker volumes change.
Note
The test tone feature works only for Dolby Pro Logic
Surround sound.
Rear
Step 3: Setting the
time
You must set the time before using the timer
functions.
The clock is on a 24-hour system for the
European and Russian models, and a 12-hour
system for other models.
The 12-hour system model is used for
illustration purposes.
1
2,4 3,5
1
Press CLOCK/TIMER SET.
The hour indication flashes.
2
Turn the jog dial to set the hour.
continued
9
Advertisement
Table of Contents
