Using The Subwoofer; (Fst-Zx100D/Lbt-Zx100D/ Mhc-Gn1000D Only); Creating A Party Environment; X-Trance/X-Trance Pro - Sony MHC-GN1000D Operating Instructions Manual

Tips
• "PRO LOGIC" lights up in the display when Pro
Logic decoding is performed.
• "PRO LOGIC II" lights up in the display when
Pro Logic II Movie/Music mode decoding is
performed.
• "LINK" lights up in the display when "LINK" is
selected.
• "VIRTUAL" lights up in the display when
"HP VIRTUAL" is selected.
• "VIRTUAL" and "DCS" light up in the display when
"V.M.DIM." is selected.

Using the subwoofer

(FST-ZX100D/LBT-ZX100D/
MHC-GN1000D only)
You can use the subwoofer to enhance the bass.
1
Press SUBWOOFER ON/OFF on the
subwoofer repeatedly until the
indicator lights up.
The subwoofer is turned on.
You will be able to listen to low bass
frequency sound.
2
Turn SUBWOOFER LEVEL to adjust
the level.
To turn off the subwoofer
Press SUBWOOFER ON/OFF on the
subwoofer again.
Tip
To adjust the volume of all speakers at the same time,
press VOLUME +/– repeatedly (or turn MASTER
VOLUME on the unit).
Creating a party
environment

— X-TRANCE/X-TRANCE PRO

You can create a party environment by using
X-TRANCE (MHC-GN1000D only) or
X-TRANCE PRO (FST-ZX100D/
LBT-ZX100D/FST-ZX80D/LBT-ZX80D
only).
The following table shows the sound effect
available for X-TRANCE and X-TRANCE
PRO.
Use the buttons on the unit for the operation.
Sound effect X-TRANCE X-TRANCE PRO
SOUND FLASH
FLANGER
DELAY
CHORUS
X-ROUND
X-BEAT
Flashing sound effect
— SOUND FLASH
(MHC-GN1000D only)
With the sound flash function, you can flash the
sound output. The sound cuts off periodically.
Hold down SOUND FLASH during
playback.
The flashing effect is activated.
To cancel the flashing effect
Release SOUND FLASH.
To change the sound flash speed
Hold down SOUND FLASH and turn
OPERATION DIAL clockwise or
counterclockwise to change the sound flash
speed (1 ~ 20).
Tip
• The power illuminator will synchronize with the
selected SOUND FLASH effect.
continued
59 GB