G AUDIO OUT jacks
Use audio cords (not supplied) to connect the
audio input jacks of an optional component
(such as VCR) to these jacks. You can then
output audio signal to that component from this
system.
Note
There is no audio output from these jacks when you
select the VIDEO, SAT or TV function.
H D-LIGHT SYNC OUT jack
Connect the D-LIGHT SYNC controller to this
jack. You need to connect the D-LIGHT SYNC
controller to a lighting device* (not supplied).
The lighting device will react according to the
control signals transmitted by the D-LIGHT
SYNC controller upon receiving music source
from the system. For details on the use of the
D-LIGHT SYNC controller and lighting device,
refer to the operating instructions supplied with
the respective device.
D-LIGHT SYNC
controller cord
* Refer to the operating instructions supplied
with the D-LIGHT SYNC controller for the
recommended lighting device.
Note
The lighting effect may be different depending on the
connected lighting device or the type of music being
played back.
I SUBWOOFER OUT jack
(FST-ZX80D and LBT-ZX80D only)
Use an audio cord (not supplied) to connect the
audio input jack of an optional subwoofer* to
this jack.
* SA-GNV111D is recommended.
In some areas, the SA-GNV111D may not yet be
available.
Note
The effect may be limited or noise may occur
depending on the connected subwoofer or the type of
music being played back. For details, consult your
nearest Sony dealer.
GB
Page 77