Connecting Optional Av Components - Sony MHC-F50 Operating Instructions Manual

Connecting optional
AV components
To enhance your system, you can connect
optional components. Refer to the
instructions of each component.
MHC-FR1 is used for illustration purpose.
Connecting a VCR
Make sure to match the color of the plugs and
the connectors. To listen to the sound of the
connected VCR, press FUNCTION repeatedly
until "VIDEO" appears.
To the audio output of the VCR
Note
If the sound is distorted when selecting "VIDEO",
switch to "MD" (see "Before connecting an MD
deck" on this page).
10
Connecting audio
components
Select one of the following two connections,
depending on the equipment to be connected
and method of connecting.
Before connecting an MD deck
Press FUNCTION repeatedly until "MD"
appears on the display.
When the power is off, press POWER while
holding down GROOVE.
"VIDEO" on the display will switch to "MD".
To return to "VIDEO", repeat the same step.
Connecting an MD deck for digital
recording
(For MHC-F100/MHC-FR1
only)
You can record from CD into the MD deck
digitally by connecting an optical cable.
To the DIGITAL IN jack of the MD deck