Display Messages - Sony MDS-M100 Operating Instructions Manual

General
Power requirements
Where purchased
U.S.A. and Canada
U.K. and Continental Europe
Other countries
Power consumption
15 W
Dimensions (approx.) 355 95
5
13 /
projecting parts and controls
Mass (approx.) 3.7 kg (8 lb 3 oz)
Supplied accessories
See page 4.
Optional accessories
Recordable MDs MDW-60 (60 min), MDW-74 (74 min)
US and foreign patents licensed from Dolby Laboratories
Licensing Corporation.
Design and specifications are subject to change without notice.
42
Power requirements
120 V AC, 60 Hz
220 - 230 V AC, 50/60 Hz
110 - 120 or 220 - 240 V AC
selectable, 50/60 Hz
3
345 mm (14 3 /
4
inches) (w/h/d) incl.
8

Display Messages

The following table explains the various messages that
appear in the display. Messages are also displayed by the
deck's Self-Diagnosis function (see page 44).
Message Meaning
Auto Cut The Auto Cut function is on (page 17).
Blank Disc A new (blank) or erased MD has been
inserted.
Cannot Copy An attempt was made to make a second
copy from a digitally dubbed MD (page
14).
Cannot Edit An attempt was made to edit the MD
during Program or Shuffle Play. Or the
MD is record-protected.
Disc Full The MD is full (page 40).
Impossible The deck cannot do the specified
operation.
Initialize (flashing) The Setup Menu settings have been lost.
Name Full The naming capacity of the MD has
reached its limit (about 1,700 characters).
No Disc There is no MD in the deck.
No Name The track or disc has no name.
No Program!! You tried to start Program Play when no
program exists.
Premastered An attempt was made to record on a
premastered MD.
ProgramFull! The program contains the maximum
number of tracks. You cannot add any
more tracks.
REMOTE The MD deck is being controlled by an
external device connected to the deck.
Smart Space The Smart Space function is on (page 17).
TOC Reading The deck is checking the TOC (Table Of
Contents) on the MD.
If "REMOTE" appears under other circumstances, turn off the deck,
*
then turn it on again.
*