Rane SL1 Operator's Manual page 37

This section of the control
RECORD BURN -
vinyl has been worn. Swap sides or use
the track start offset.
Your record is badly
BAD RECORD BURN -
worn and Scratch Live is unable to track.
Swap sides or get new vinyl ASAP.
TONEARM IS SLIGHTLY TOO LIGHT -
Susceptible to dust and vibration. Adjust
the tonearm.
RANE SL1 FOR SERATO SCRATCH LIVE • OPERATOR'S MANUAL 2.5.0
The signal from the
LEFT CHANNEL MISSING -
needle is not reaching the SL1. Check the
cable and cartridge connections.
Left signal has
LEFT CHANNEL IS NOISE -
been lost with a noisy loose connection.
SIGNALS ARE SUMMING TO MONO -
and right signals have been combined into
one somewhere in your signal chain.
RIGHT CHANNEL MISSING -
the needle is not reaching the SL1. Check
the cable and cartridge connections.
RIGHT CHANNEL IS NOISE -
been lost with a noisy loose connection.
The left
RIGHT CHANNEL IS INTERFERENCE -
signal has been lost with a noisy loose
connection and left channel crosstalk.
The signal from
Right signal has
Right
37