Corrupt File Descriptions And Diagnoses - Rane SL1 Operator's Manual

Corrupt File Descriptions
and Diagnoses
Corrupt file: This MP3 contains invalid
frames.
Corrupt file: This file contains corrupt
frames that may result in audible glitches.
Corrupt file: This file structure is incorrect.
Corrupt file: This file has been split. You
should check the beginning for audio
glitches.
Corrupt file: This MP3 contains frames
with corrupt data.
Corrupt file: This MP3 lost syncronization
between the frame index and the frames.
Corrupt file: This MP3 is completely invalid
and is not playable.
Corrupt file: This file contains invalid audio
data.
Corrupt file: This MP3 contains no valid
frames.
Unsupported file: This MP3 contains mul-
tiple layers.
Unsupported file: This file is more than
2GB in size.
Unsupported file: This file has data blocks
greater than 2GB in size.
Corrupt file: This WAV contains no valid
chunks.
Unsupported file: This file's data is not in
PCM format.
Unsupported file: This file has a sampling
rate greater than 96 kHz.
Unsupported file: This file uses more than
24 bits per sample
Corrupt file: This WAV is incomplete.
Corrupt file: This file contains corrupt
blocks.
Corrupt file: This song contains no audio
data.
Corrupt file: This song contains invalid
samples.
RANE SL1 FOR SERATO SCRATCH LIVE • OPERATOR'S MANUAL 2.5.0
This MP3 contains frames which do not conform strictly to the official MP3 specification.
Scratch Live can not be certain that this file will play back 100% accurately.
This file contains two or more contiguous corrupt frames. Since corrupt frames are
replaced with silence, this could result in what might sound like an audio glitch.
This file has caused the QuickTime metadata manager to fail.
The first MPEG audio frame in this file refers to audio that should be present before it
but is not. This is usually the result of incorrect MP3 editing. Since a corrupt frame is
replaced with silence and most songs start with silence, the resulting silence might not be
noticeable. All the same, listen to the beginning of the song, just to be sure.
Decoding of an MPEG audio frame failed. This means that the frame contained invalid
data. As usual with corrupt frames, this frame will be played as silence.
Scratch Live is reading an old overview of an MP3 that has been edited in a 3rd party
editing program. Re-building the overviews for the affected files usually corrects this error.
Self explanatory. Possible causes are disk bad sectors, file system corruption, wrong file
types, wrong file extensions, etc
Scratch Live encountered invalid data while looking for audio in this file. This message
alerts you to the fact that the file you're trying to play contains corrupt data. This may, or
may not, affect playback.
No audio could be found in this file, which means it is completely unplayable as far as
Scratch Live is concerned. Please make sure this really is an audio file.
While scanning this file, Scratch Live found frames belonging to multiple MPEG layers.
Scratch Live does not support MP3s that contain frames from multiple layers – some
frames may be output as silence.
Self explanatory. At the moment, Scratch Live does not support files that are 2GB in size
(or larger).
This file contains chunks of data that are larger than 2GB. Scratch Live does not support
files that are more than 2GB in size.
This WAV file contains no recognizable WAV data. It is quite possible that this might not be
a WAV file.
WAV files can contain data in several formats. Scratch Live only supports WAV files that
contain data in the PCM format.
Scratch Live does not support sampling rates greater than 96 kHz. If you see this
message, the simplest approach is to re-sample the audio at 96 kHz and re-save the file.
Scratch Live supports a maximum of 24 bits per sample of audio data.
Scratch Live expected more data in the file, but found none. This could be because the file
was incorrectly truncated or because the data in the file is corrupt, causing Scratch Live to
incorrectly estimate the amount of data present in the file.
This file contains blocks of data that report their size to be zero. This message was
inserted to identify files that might cause lockups on previous versions of Scratch Live.
Scratch Live could not find any audio in this file. Please check to make sure this file
contains audio in a format that Scratch Live supports.
This file contains samples of audio that are too small to represent accurately and will
therefore be truncated to zero. This should not result in any audible audio artifacts, but
could cause audio dropouts on earlier versions of Scratch Live.
35