The Immobilizer System - PIAGGIO Vespa GTS 300 HPE 2019 Owner's Manual

Table of Contents

Advertisement

3. Turn the ASR system off by pressing the specific button "1" on the handlebar
and check that the ASR disabling icon "2" stays on steady.
4. Press at the same time the engine starter button and the ASR on/off button
"1" for at least 4 seconds (pulling the LH brake lever has no effect).
5. The activation of the procedure will be confirmed by the ASR icon "2 " switch-
ing on with slow flashing (1 flash every 2 seconds).
6. Accelerate to a constant speed of 30 km/h (18.7 mph) and maintain it for at
least to 10 seconds.
7. The end of the procedure will be indicated by the switched off ASR icon "2".
8. Once the procedure is complete, it is necessary to turn the ignition switch to
"OFF" and wait at least 30 seconds for the next key "ON".
9. In case of failure to complete the procedure within 2 minutes the ASR symbol
«2» will stay on steady and the ASR will remain off until the next key
«OFF».
10. To restart the ASR, it is necessary to turn the key to "ON" and repeat the
procedure until achieving positive result.

The immobilizer system

In order to enhance theft protection, the vehicle is equipped with a «PIAGGIO IMMO-
BILIZER » electronic engine locking device that is activated automatically when the
ignition key is removed. Upon start-up, the «PIAGGIO IMMOBILIZER» system checks
the starter key, and only if this key is recognised will the Immobiliser system allow the
vehicle to be started.
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents