BenQ GL2040 Service Manual page 51

Press MENU to leave the OSD Settings menu.
Allows the monitor settings to be
DDC/CI*
set through the software on the PC.
Sets the time to power off the
Auto Power
monitor automatically in power
off
saving mode.
Displays the current monitor
Information
property settings.
Resets all mode, color and
Reset All geometry settings to the factory
default values.
*DDC/CI, short for Display Data Channel/Command Interface, which was developed by Video Electronics
Standards Association (VESA). DDC/CI capability allows monitor controls to be sent via the software for remote
diagnostics.
keys to select "NO" in the "OSD
Lock" submenu from the "OSD
Settings" menu, and all OSD
controls will be accessible.
Press the ENTER key to select
this option. Press the ▲ or ▼ keys
to change the settings.
Press the ENTER key to select
this option. Press the ▲ or ▼ keys
to change the settings.
Press ▲ or ▼ keys to change the
settings.
51
ON
OFF
• OFF
• 10min.
• 20min.
• 30min.
• Input
• Current
Resolution
• Optimum
Resolution
(best with the
monitor)
• Model Name
YES
NO