Modem Problems - Uniwill X51 Series Manual

You need to install additional memory module. For instructions, go to Chapter 4 Upgrading
Your Computer.

Modem Problems

The built-in modem does not respond -
Make sure the modem driver is loaded properly.
Make sure the modem is not disabled under CMOS configuration.
Go to [Start > Settings > Control Panel > Phone and Modem Options] and go to Modems
tab. Make sure Azalia Modem is listed. Otherwise, click the Add button to add the modem
drive, which is located in the factory CD-ROM (or floppy diskette).
Go to [Start > Settings > Control Panel > System] and click Device Manager button in the
Hardware page to check for possible resource or driver conflict. See Windows on-line help
or manual for how to handle such problems.
Make sure the phone line, which the computer is connected to, is working.
Connection difficulties -
Be sure to disable Call Waiting on the phone line.
Be sure to have the correct country setting where your computer is used. [Start > Settings >
Control Panel > Modem Settings > Configuration] In the Country/Area pull-down menu,
select the appropriate country setting.
Excessive line noise might cause the connection to be dropped. To check this, put the
regular phone handset on the line and placing a phone call. If you do hear abnormal noise,
try to make the modem connection with a different line or contact your local telephony
company for service.
Make sure the cable connection is firm.
Try a different receiver number and see if the problem persists.
7