Using The Timers - Sony CMT-U1 Operating Instructions Manual

Using the Timers

The system offers two timer functions. If you
use the Play Timer with the Sleep Timer, the
Sleep Timer has priority.
Sleep Timer:
You can fall asleep to music. This function
works even if the clock is not set.

Press SLEEP
"AUTO, " the system automatically turns off
after the current disc stops or in 100 minutes.
Play Timer:
You can wake up to CD, tuner or optional USB
device at a preset time.
Use buttons on the remote to control the Play
Timer. Make sure you have set the clock.
1
Prepare the sound source.
Prepare the sound source, and then press
VOLUME +/–
To start from a specific CD track, "ATRAC"
file or MP3 file of a disc, create your own
program (page 18).
2
Press CLOCK/TIMER SET
3
Press /
select "PLAY SET?, " and then press

ENTER
"ON" appears, and the hour indication
flashes.
4
Set the time to start playing.
Press /
the hour, and then press ENTER
The minute indication flashes. Use the
procedure above to set the minutes.
0
GB
repeatedly. If you select

to adjust the volume.

.

repeatedly to
.

repeatedly to set
5
Use the same procedure as in step 4
to set the time to stop playing.
6
Select the sound source.
Press /
desired sound source appears, and then
press ENTER
timer settings.
7
Press /
The system turns on 15 seconds before the
preset time. If the system is on at the preset
time, the Play Timer will not play.
To activate or check the timer again
Press CLOCK/TIMER SELECT
/
SELECT?" appears, and then press ENTER
To cancel the timer
Repeat the same procedure as above until
"TIMER OFF" appears, and then press ENTER

.
To change the setting
Start over from step 1.
Note
You cannot perform Program Play of the files on an USB
device using the Play Timer.
Tip
The Play Timer setting remains as long as the setting is
not canceled manually.

.

repeatedly until the

. The display shows the

to turn off the system.


repeatedly until "PLAY
, press

.