Listening To Music Of An Usb Device - Sony CMT-U1 Operating Instructions Manual

Listening to music of an
USB device
You can connect an optional USB device
(Digital music player or USB storage media) to
the (USB) port
music stored in the USB device. See "Playable
USB devices" (page 28) for a list of USB devices
that can be connected to this system.
The audio formats that can be played back
by this system are as follows: ATRAC/MP3
WMA /AAC
1) 1)2)
Files with copyright protection (Digital Rights
1)
Management) cannot be played by this system.
2) AAC files transferred to a digital music player using
SonicStage CP cannot be played by this system.
1
Select the USB function.
Press USB
2
Connect an optional USB device
(Digital music player or USB storage
media) to the
shown below.
USB device (Digital music player or
USB storage media)
When USB cable connection is necessary,
connect the USB cable supplied with the
USB device to be connected.
See the operation manual supplied with the
USB device to be connected for details on
the operation method.
When the USB device is connected, the
display changes as follows:
"Detect"  "Connecting"  "ATRAC
AD" or "STORAGE DRIVE"
14
GB

on the unit and listen to

.
(USB) port 
Note
It may take about 10 seconds before "Detect" appears
depending on the type of USB device connected.
3
Start playback.
Press  (or USB  on the unit)
4
Adjust the volume.
Press VOLUME +/–
Other operation
To
/
1)
Pause playback
Stop playback
Select a folder
Select a file
Select a folder
and file using the
buttons on the
as
unit*
Find a point in
a file
Select Repeat
Play
Remove the USB
device
* Artist searches and group searches are possible for
some USB device types.

.
Press
 (or USB  on the

unit) . To resume play,
press the button again.
 
.
+/– (or / on the

unit) .
/ 
.
 . Press /
SEARCH

to select the desired
folder, then press ENTER
 . Press / 
to select
the desired file, then press

ENTER .
Hold down /

during playback, and
release the button at the
desired point.

REPEAT repeatedly
until "REP" or "REP1"
appears.
Hold down  
until
"Device Stop" appears, then
remove the USB device.

.