Getting Started - PURE DMX-20 Owner's Manual

Getting started

1. Remove the adhesive tape securing the CD door and remove the CD mechanism transit
card from inside the CD compartment.
2. Insert the remote batteries.
3. Connect the speakers.
4. Extend the aerial vertically, and plug the unit into your power supply.
5. Press the STANDBY/ON button, if necessary, to switch the unit on. An autotune finds the
DAB stations available in your area and selects one.
6. Push and turn the large dial to see all the available stations. Push again to change to
another station.
7. Push the Source button to listen to FM, CD, LINE IN (front connector) or AUX IN (rear
connector).
4
OPEN/CLOSE
STANDBY/ON
- + STOP PLAY/PAUSE - +
SEARCH FOLDER
OPEN/CLOSE
STANDBY/ON
- + STOP PLAY/PAUSE - +
SEARCH FOLDER
AUX IN
DAB
ANT.
SPEAKERS
IMPEDANCE 4 Ω
L
R
AUX IN
DAB
ANT.
SPEAKERS
IMPEDANCE 4 Ω
L
R
SPEAKERS
IMPEDANCE 4 Ω
L
R