Armstrong 64357 Owner's Manual & Safety Instructions page 6

Mount tV Plate to tV
WarnInG! to reduce risk of electric shock, unplug tV before threading bolts into tV's back panel.
notICE: Consult TV owner's manual before attaching this Mount. Harbor Freight Tools is not responsible for
damage caused by failure to follow TV mounting instructions, improper installation, or improper/loose hardware.
1. Cover TV screen with a towel or other soft material
and tilt it against the wall or another solid surface.
Do not lay tV face down.
2. Consult TV Owner's Manual to determine TV's
VESA mounting pattern and hardware requirements.
Mounting Instructions for VESa 100 x 100, 200 x 100, 200 x 200
Attach TV Plate (2) to Mounting Holes on TV using appropriate TV Bolts
and TV Washers. Use TV Spacers if necessary.
Page 6
tV Spacer (13 or 14)
(if necessary)
tV Bolt
(4 - 9)
tV Washer
(10 - 12)
tV Plate
(2)
For technical questions, please call 1-888-866-5797.
3. Mounting Hardware:
a. Use mounting hardware that came with the TV, or
b. If the TV did not come with mounting hardware,
select from included TV Bolts, TV Washers and
TV Spacers (see Parts List on page 11).
WarnInG! to prevent serious injury, do not use
hardware that does not match the tV's hardware,
that is too long or too short, or overtighten
the hardware. Doing so may damage the
tV, create a shock hazard by electrifying the
hardware/mount, and/or cause the tV to fall.
4. Select Mounting Instructions below
according to TV's mounting pattern.
Mounting
Hole on tV
Item 64357