Installation Instructions - Armstrong 64357 Owner's Manual & Safety Instructions

Installation Instructions

read the EntIrE IMPortant SaFEty InForMatIon section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Mount Wall Mount
Wood Studs
CaUtIon! Do not mount to steel wall studs.
1. Verify wood studs are at least 16" apart.
Use a stud finder (sold separately) to find two
adjacent studs 16" apart. Mark locations of studs.
WarnInG! Verify that mounting surface has no
hidden utility lines before drilling or driving screws.
2. Set Wall Mount (1) against wall at desired height.
Place a level (sold separately) on top of Wall Mount,
adjust until level. Mark locations of mounting holes.
Wall lag
Bolt (17)
Page 4
Wall Washer
(19)
For technical questions, please call 1-888-866-5797.
3. Drill four 3/16" holes 3-1/2" deep into
studs at marked locations.
WarnInG! only mount Wall Mount to wood studs.
Do not mount Wall Mount to drywall or plaster.
4. Use four Wall Lag Bolts (17) and
four Wall Washers (19) to mount
Wall Mount to wood studs.
Wall
Mount (1)
Item 64357