Armstrong 64357 Owner's Manual & Safety Instructions page 5

Concrete
CaUtIon! Do not mount to brick or cinder block wall.
Minimum 8 inch thick solid concrete is required.
1. Set Wall Mount (1) against wall at desired height.
Place a level (sold separately) on top of Wall Mount,
adjust until level. Mark locations of mounting holes.
2. Using a 3/8" carbide tip masonry bit, drill four
holes 3-1/2" deep at marked locations.
3. Insert Concrete Wall Anchors (18) into holes,
making sure they are flush with wall surface.
Concrete Wall
anchor (18)
Wall lag
Bolt (17)
Item 64357
Concrete
3-1/2"
Wall Washer
(19)
For technical questions, please call 1-888-866-5797.
WarnInG! Concrete Wall Anchors
must be set firmly into concrete.
4. Use four Wall Lag Bolts (17) and
Wall Washers (19) to mount Wall Mount to wall.
Wall
Mount (1)
Page 5