Messages - Sony CMT-HX3R Operating Instructions Manual

Sony operating instructions micro hi-fi component system cmt-hx3r
Hide thumbs Also See for CMT-HX3R:
Table of Contents

Advertisement

Messages

CD/MP3 player, Tuner
Complete!: The preset operation ended
normally.
Invalid: You pressed an invalid button.
LOCKED: The disc tray does not open.
Contact your nearest Sony dealer.
No Disc: There is no disc in the system,
or you have loaded a disc that cannot
be played.
No Step: All of the programmed tracks
or files have been erased.
Over: You have reached the end of the
disc while pressing 
playback or pause.
Push SELECT!: You tried to set the clock
or timer during timer operation.
Push STOP!: You pressed PLAY MODE
during playback.
Reading: The system is reading
information of the disc. Some buttons
are not available.
SET CLOCK!: You tried to select the timer
when the clock is not set.
SET TIMER!: You tried to select the timer
when the Play Timer is not set.
Step Full!: You tried to program more
than 26 tracks or files (steps).
TIME NG!: The Play Timer start and end
times are set to the same time.

GB
during
USB device
Complete!: The MP3 file or folder on the
USB device has been erased.
Device Full!: The USB device is full.
Erase Error!: Erase of MP3 files or
folders on the USB device failed.
Error: The USB device could not be
recognized or an unknown device is
connected (page 26).
Fatal Error!: The USB device was
disconnected while recording to or
erasing MP3 files or folders on the USB
device.
Folder Full!: The number of folders
on the USB device has reached the
maximum.
Invalid: You have made an invalid or
currently prohibited operation.
No Device: No USB device is connected
or the connected USB device has been
stopped.
No Step: All of the programmed tracks
or files have been erased.
No Track: No playable file is loaded in
the system.
Not Supported: An unsupported USB
device is connected.
Please Wait: The system is readying for
usage of an USB device.
Protected!: You tried to record or erase
a write-protected USB device.
Reading: The system is recognizing the
USB device.
Rec Error!: Recording did not start,
stopped partway, or otherwise could
not be performed (page 25).
Removed: The USB device has been
removed.
Step Full!: You tried to program more
than 26 tracks or files (steps).
STORAGE DRIVE: USB storage media is
connected.
Track Full!: The number of files on the
USB device has reached the maximum.

Advertisement

Table of Contents
loading

Table of Contents