Table of Contents
Advertisement
Maintenance and Care
5.9 Squeegee
1 Squeegee
2 Star-shaped knob
3 Adjustment screw
4 Suction hose
5 Toggle-type fastener
Fig.12
36
5.9.1
Cleaning Squeegee Assembly
Clean squeegee (Fig. 12/1) at daily
intervals or as required.
Lift squeegee, pull off suction hose
(Fig. 12/4) loosen both star-shaped
knobs (Fig. 12/2) and remove squeegee
assembly.
5.9.2
Changing Squeegee Blades
Check inner and outer blades of Squeegee
assembly (Fig. 12/1) for wear at
weekly intervals. Fourfold use of the
blades is possible by turning.
1. Lift the Squeegee.
2. Pull off suction hose (Fig. 12/4) loosen
both star-shaped knobs (Fig. 12/2) and
remove squeegee assembly
3. Open toggle-type fastener (Fig. 12/5)
and remove outer squeegee blade.Turn
blade or install new one if required.
4. Also change the inner blade.
5.9.3 Adjusting Squeegee Assembly
1. Park machine on level ground.
2. Loosen the adjustment screw (Fig.12/3) )
and proceed to parallel adjustment
of squeegee blades and floor. Turn
adjustment screw clockwise: clearance
between squeegee blade and floor
in the central area widens. Turn adjustment
screw counter-clockwise: clearance
between squeegee blade and floor in the
central area narrows.
3. Switch on machine, lowered squeegee
and check squeegee flare pattern.
Advertisement
Table of Contents
