Optional Components; Hooking Up Optional Components - Sony CMT-GPX5 Operating Instructions Manual

Optional Components

Hooking up optional components

To enhance your system, you can connect optional components. Refer to the operating instructions
provided with each component.
A MD/VIDEO jacks
Use audio cords (not supplied) to connect an
optional analog component (MD deck, etc.) to
these jacks. You can then listen to the sound
from the component.
GB
22
From the audio output
jacks of an optional
analog component
Optional analog component
Listening to audio from a
connected component
1
Connect audio cords.
See the illustration above.
2
Press FUNCTION repeatedly until "MD" or
"VIDEO" appears.
Start playing the connected component.
Tip
If you cannot select "VIDEO" by pressing
FUNCTION repeatedly, turn off the system and then
press ?/1 on the unit while holding down FUNCTION
on the unit. The function will change from "MD" to
"VIDEO", and "VIDEO" will appear in the display. To
change back to "MD", repeat the same procedure.
However, you cannot switch the MD/VIDEO function
in Power Saving Mode.