Unpacking - Cyclamatic Power Plus CX1 Operating Manual

Unpacking

Packaging – Remove packaging materials and dispose of in a responsible manner. Remove all
materials and set parts aside for assembly. Should your model be a foldable or non-foldable,
minimal assembly is required for your bicycle. However, please follow the guidelines below for
correct assembly.
Tools required – 8mm box-end wrench, 10mm box-end wrench, 15mm pedal wrench, 14mm
open-end wrench, 5mm hex key, 6mm hex key, screw driver, Cutters/Pliers.
A small tool kit (pictured) is included for assembly. If any parts are missing, please contact the
nearest dealer listed on the back page.
5